Description
DBA’s Street Performance (SP) brake pads have been designed for drivers seeking improved braking performance over traditional O.E. brake pads. DBA Street Performance is the next step up for all vehicles, developed to provide an effective friction response to pedal application and offer low wear and dust minimization.
Will fit the following
- Audi A1 TFSI 8X 2015 - 2019
- Audi A3 TDI & FSI 8P 2003 - 2016
- Audi Q3 TDI & TFSI 8U 2012 - 2019
- Skoda Fabia 77, RS, 6Y, 81 2010 - 2021
- Skoda Octavia RS TDI 1Z 2005 - 2018
- Skoda Superb TDI & TSI 3T 2008 - 2015
- Volkswagen Beetle 1L 2012-2018
- Volkswagen Golf MK5, MK6 2003 - 2013
- Volkswagen Passat TDI & FSI B6 3C 2006 - 2018
Don't see your vehicle listed Click here to find your parts!
The SP range is recommended for street performance vehicles, 4WD’s and SUV’s and light commercial/trade vehicles.
DBA Street Performance part numbers are denoted by the suffix (SP).
DBA’s range of Performance brake pads have been designed at the forefront of technology and quality standards. DBA has utilized a range of cutting-edge features including:
1. Chamfer – Reduces noise, vibration and harshness*
2. Slot – Facilitate temperature stability
3. Premium Quality Shim – Dual layer elastomeric coated shim
4. Scorching Process (TSP) – Raises cold friction effectiveness and reduces bedding-in time
5. Backing Plate – G3131 steel – dimensionally stable and wear resistant
6. Electronic Wear Sensor – OE replacement wear sensor**
Note: Brake Pad / Caliper Hardware included where applicable.
**Electronic wear sensors included where applicable**
All DBA Performance brake pads are scorched on the friction surface to improve the bedding in process and minimize the onset of green fade typically experienced with new pads. Thermal Stability Profiling (TSP), a process unique to DBA, increases cold friction effectiveness and reduces bedding-in time.
The Performance pads include chamfers where required to reduce unwanted noise, vibration and harshness under braking while the center slot facilitates temperature stability. DBA’s brake pad backing plates are made from high quality steel that is resistant to wear.
DBA also uses high quality European made, triple layer shims to enhance the pad noise dampening characteristics (included in all products).
Of course, these pads are asbestos free with no other nasty materials while at the same time keeping dust to a minimum and are gentle on wheels, with no sticky goo to scrub off.
As with all DBA products, the Performance pad range is backed up with full technical support both online and in the field.
