Description
PAGID RACING SHAPE U1287
Will fit the following vehicles.
- Aston Martin Vanquish 03-08 (FRONT)
- Audi R8 4.2 and 5.2 FSI quattro
- Audi R8 4.2 and 5.2 FSI quattro [ceramic brakes]
- Audi R8 5.2 FSI quattro (2nd generation)
- Audi R8 5.2 FSI quattro (2nd generation) [ceramic brakes]
- Audi R8 5.2 RWS (2nd generation)
- BMW M2 [F87] Competition
- BMW M2 CS Racing [Permit B 365PS]
- BMW M2 CS Racing [Permit B 365PS]
- BMW M4 [F82] [ceramic brakes]
- Dodge Viper Competition Coupe (FRONT & REAR)
- Dodge Viper SRT-10 (FRONT & REAR)
- Ferrari 512 Testarossa (FRONT)
- Ferrari F40 Street and race (FRONT & REAR)
- Ferrari F50 (FRONT & REAR)
- Lamborghini Diablo [Brembo brakes] (FRONT & REAR)
- Lamborghini Gallardo
- Lamborghini Gallardo [ceramic brakes]
- Lamborghini Huracán [iron brakes]
- Lamborghini Huracán and Performance [ceramic brakes]
- Lamborghini Murciélago [non ceramic] (FRONT & REAR)
- Ligier JS 2R (GT car, Brembo 6 piston front caliper)
- McLaren F1 / shape rear on inquiry (FRONT)
- Nissan R35 GTR
Will fit the following calipers.
- Brembo 07.4865. GT (F-40) [caliper family B, H, P]
- Brembo M4 in combination with 52mm radial disc swept depth
Available in the following compounds.
RS14 & RS15
RS 14 features good all-round characteristics for many applications. It is a low metallic resin bonded material containing steel and aramid fibers.
RS42
RS 42 is a low metallic resin bonded material containing steel and aramid fibers. The characteristics make this material appropriate for small formula cars.
RSL1 & RSL1E
RSL 1E and RSL 1 are low metallic resin bonded materials containing steel and aramid fibers with very high heat resistance. They maintain a constant friction level over a wide range of temperatures. Their reduced wear rate and disc friendliness make these materials appropriate for endurance races. RSL 1E is further improved in terms of pad life and modulation as well as friction stability at high temperatures and pad life. As a benefit, RSL 1E provides the lowest pad wear rate in the PAGID Racing portfolio for highly thermally loaded applications.
RSL29
RSL 29 features very good modulation and release characteristics. It is a low metallic resin bonded material containing steel and aramid fibers. The friction level of the material maintains constant at a low-medium level. Another advantage is the easy bedding in behavior.
RST3
RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity.
RSC1
RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage.
