PAGID RACING BRAKE PADS U4345 MCLAREN 570S/570SGT4/650S/675LT/MP4-12C REAR

RaceBrakes NZSKU: U4345 RS14

Price:
Sale price$499.00

Description

PAGID RACING SHAPE U4345

Will fit the following vehicles.

  • Lotus 3-Eleven 430
  • Lotus Evora 3.5 400
  • Lotus Evora 3.5 and 3.5S
  • Lotus Exige V6 Sport 350
  • McLaren 570S GT4 [race car] (wider front caliper)
  • McLaren 570 S GT4 [race car] Alcon front Calipers
  • McLaren 570S GT4 race car
  • McLaren 570S, 540C, 570 GT
  • McLaren 650S / Spyder
  • McLaren 675LT
  • McLaren MP4-12C 
  • Renault Clio 3.0 V6 Turbo Sport

Will fit the following calipers.

  • Alcon RC4
  • AP Racing CP6600 D55

Available in the following compounds.

RS14

RS 14 features good all-round characteristics for many applications. It is a low metallic resin bonded material containing steel and aramid fibers.

RSL1 & RSL1E

RSL 1E and RSL 1 are low metallic resin bonded materials containing steel and aramid fibers with very high heat resistance. They maintain a constant friction level over a wide range of temperatures. Their reduced wear rate and disc friendliness make these materials appropriate for endurance races. RSL 1E is further improved in terms of pad life and modulation as well as friction stability at high temperatures and pad life. As a benefit, RSL 1E provides the lowest pad wear rate in the PAGID Racing portfolio for highly thermally loaded applications.

RSL2

RSL 2E and RSL 2 are low metallic resin bonded materials containing steel and aramid fibers with high heat resistance. They maintain a constant friction level over a wide range of temperatures. Their reduced wear rate and disc friendliness make these materials appropriate for endurance races on applications with high cooling efficiency. RSL 2E is further improved in terms of pad life and modulation, as well as friction stability at high temperatures and pad life with optimized cooling.

RSL29

RSL 29 features very good modulation and release characteristics. It is a low metallic resin bonded material containing steel and aramid fibers. The friction level of the material maintains constant at a low-medium level. Another advantage is the easy bedding in behavior.

RST3

RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity.

You may also like

Recently viewed